BTD 网络拓扑生成器

网络设备 JSON 配置

必填：包含 network_devices 和 network_connections 字段

{
  "network_devices": [
    {
      "hostname": "C1-GSR12016",
      "device_type": "core-router",
      "vendor": "Cisco",
      "model": "GSR12016",
      "loopback_interface": {
        "name": "Loopback0",
        "ip_address": "192.168.1.1/32"
      },
      "interfaces": [
        {
          "name": "TenGigabitEthernet0/0",
          "description": "TO-S1-7609",
          "ip_address": "10.10.1.1/24",
          "mtu": 1500,
          "pim_sparse_mode": true,
          "admin_status": "up",
          "oper_status": "up"
        },
        {
          "name": "TenGigabitEthernet0/1",
          "description": "TO-S2-3750",
          "ip_address": "10.10.2.1/24",
          "mtu": 9216,
          "admin_status": "up",
          "oper_status": "up"
        }
      ],
      "routing_protocols": {
        "bgp": {
          "asn": 65001,
          "neighbors": [
            {
              "neighbor_ip": "10.10.1.2",
              "remote_as": 65002,
              "description": "S1-7609"
            },
            {
              "neighbor_ip": "10.10.2.2",
              "remote_as": 65003,
              "description": "S2-3750"
            }
          ]
        },
        "ospf": {
          "process_id": "1",
          "areas": [
            {
              "area_id": "0.0.0.0",
              "networks": ["10.10.1.0/24", "10.10.2.0/24"]
            },
            {
              "area_id": "1.1.1.1",
              "networks": ["192.168.1.0/24"]
            }
          ]
        }
      }
    },
    {
      "hostname": "S1-7609",
      "device_type": "switch",
      "vendor": "Cisco",
      "model": "7609",
      "loopback_interface": {
        "name": "Loopback0",
        "ip_address": "192.168.2.1/32"
      },
      "interfaces": [
        {
          "name": "TenGigabitEthernet3/1",
          "description": "FROM-C1-GSR12016",
          "ip_address": "10.10.1.2/24",
          "mtu": 1500,
          "admin_status": "up",
          "oper_status": "up"
        },
        {
          "name": "TenGigabitEthernet3/2",
          "description": "TO-SW1-2960",
          "ip_address": "10.10.3.1/24",
          "mtu": 1500,
          "admin_status": "up",
          "oper_status": "up"
        }
      ],
      "routing_protocols": {
        "ospf": {
          "process_id": "1",
          "areas": [
            {
              "area_id": "1.1.1.1",
              "networks": ["10.10.1.0/24", "10.10.3.0/24"]
            }
          ]
        }
      }
    },
    {
      "hostname": "SW1-2960",
      "device_type": "switch",
      "vendor": "Cisco",
      "model": "2960",
      "loopback_interface": {
        "name": "Loopback0",
        "ip_address": "192.168.3.1/32"
      },
      "interfaces": [
        {
          "name": "GigabitEthernet0/1",
          "description": "FROM-S1-7609",
          "ip_address": "10.10.3.2/24",
          "mtu": 1500,
          "admin_status": "up",
          "oper_status": "up"
        }
      ]
    }
  ],
  "network_connections": [
    {
      "source_device": "C1-GSR12016",
      "source_interface": "TenGigabitEthernet0/0",
      "destination_device": "S1-7609",
      "destination_interface": "TenGigabitEthernet3/1",
      "link_type": "fiber",
      "status": "active",
      "bandwidth": 10000
    },
    {
      "source_device": "S1-7609",
      "source_interface": "TenGigabitEthernet3/2",
      "destination_device": "SW1-2960",
      "destination_interface": "GigabitEthernet0/1",
      "link_type": "ethernet",
      "status": "active",
      "bandwidth": 1000
    }
  ]
}

样式自定义

自定义节点、连线、集群的样式（如颜色、形状、字体）

拓扑图生成结果

样式配置